Guaranteed
Analysis:
Crude
Protein, (min.) 24.0%
Crude Fat, (min.)
30.0%
Crude
Fiber, (max.)
0.15%
Ash, (max.)
6.5%
Calcium, (min.)
0.70%
Calcium, (max.)
1.00%
Phosphorus, (min.)
0.60%
Vitamin A, (min.) 25,000 IU/LB
Vitamin D3, (min.) 5,000 IU/LB
Vitamin E, (min.)
80 IU/LB
Total
Enterococcus Faecium And
Lactic Acid Bacteria 1 Billion CFU/LB
Ingredients:
Dried Skimmed Milk, Dried Whey Protein Concentrate, Dried Whey Product,
Dried Milk Protein, Animal and Vegetable Fat (preserved with BHA),
Dried Corn Syrup, Lecithin, L-Lysine, DL-Methionine, Vitamin A acetate,
Vitamin D3 Supplement, Vitamin E Supplement, Ascorbic Acid, Choline
Chloride, Vitamin B12 Supplement, Menadione Sodium Bisulfite Complex
(source of Vitamin K3), Niacin Supplement, Calcium Pantothenate,
Pyridoxine Hydrochloride, Riboflavin, Folic Acid, Thiamine Mononitrate,
Biotin, Calcium Iodate, Calcium Carbonate, Dicalcium Phosphate,
Magnesium Sulfate, Cobalt Sulfate, Copper Sulfate, Ferrous Sulfate,
Sodium Selenite, Manganese Sulfate, Zinc Sulfate, Manganese Proteinate,
Iron Proteinate, Zinc Proteinate, Citric Acid, Dried Enterococcus
Faecium Fermentation Product, Dried Lactobacillus Fermentation
Product, Dextrose, Natural and Artificial Flavors.
LMR-25
Lammilco
Lamb Milk Replacer
25
LB. Bag
LMR-50
Lammilco
Lamb
Milk Replacer
50
LB. Bag (special order)
Minimum
Order 2 Tons
Lead
Time Required For Order
Volume
Discounts Available
For
More Information
And
To
Place Orders
Call
1-888-376-6777
|
|
Product
Profile:
Lammilco
Lamb Milk Replacer is a cold-processed milk replacer that uses only
the highest grade ingredients and is formulated for optimum lamb
performance. For a more complete description of the cold-processing,
ingredient selection and specialized formulation used in the design
of Lammilco lamb milk replacer, see Crystal Creek's Elite
Calf Milk Replacer. The information there apply's equally
to Lammilco lamb milk replacer.
Mixing
And Feeding Directions:
Mix at
a rate of 2 lbs. of Lammilco with 1 gallon of water or 1 measuring
cup (4 oz.)* of Lammilco with 1 pint of water.
1.
For cold ad lib feeding with free access feeders.
Make a
concentrated mix (slurry) by adding Lammilco to 1/3 of the quantity
of water at 135 degrees F. Mix with wire whip until all product
is dissolved. Add cold water to equal the total volume needed.
Allow reconstituted lamb milk replacer to cool off to room temperature
before feeding. Cooled Lammilco is used to limit intake and
prevent over-eating. A one day supply can be mixed at one
time.
2.
For restricted hand feeding with a bottle.
Make a
concentrated mix (slurry) by adding Lammilco to 1/3 of the quantity
of water at 135 degrees F. Mix with wire whip until all product
is dissolved. Add additional cooler water to equal the total
volume needed. Feed reconstituted milk replacer at 100 degrees
F. according to the following schedule:
Day
1 - 2 Colostrum
Day 3 - 4 3 oz. of reconstituted
Lammilco every 4 hours.
Day
5 - 14 Gradually increase amount per
feeding from 3 to 8 oz. and reduce number
of feedings from 6 to 3 per day.
After
Day 14 Feed 8 - 12 oz. of reconstituted Lammilco
3 times per day.
Lambs can
be weaned at 4 - 6 weeks of age, weighing at least 25 lbs.
* Measuring cup in each bag holds approximately 4 oz. of dry product.
Management
Tips:
1. Lammilco
can be used to save orphan lambs, weak lambs, unclaimed lambs, and
lambs from multiple births.
2.
Feed colostrum for at least the first 24 hours of life. If
ewe's colostrum is not available, cow's colostrum can be used.
3.
Assist lambs for the first day or two on the feeding device used.
4.
Provide a dry, warm and draft-free pen to start lambs on Lammilco
milk replacer.
5.
Provide a high quality lamb starter feed at one week of age.
6.
Lambs can be weaned at 4 - 6 weeks of age weighing at least 25 lbs.
7. Keep
milk replacer feeding equipment clean.
|